LANOLENE™ TEFLAN Grease delivers excellent preservation, (TEFLON™ Du Pont Corp.) lubrication and
serviceability for the Marine, General Maintenance & Engineering Industries. Withstands marine weather conditions
and constant immersion in salt water.
Technical Application Guide Ref: LTGTG01A
ACID & ALKALI RESISTANT
32 kV/rms DIELECTRIC STRENGTH
PH (6.8) NEUTRAL
HYDROLYSIS, ELECTROLYSIS and GALVANIC RESISTANT
All Fittings and Fasteners working in temperatures ranging from >-30° to <210°C. Exceptional performance when used on dissimilar metals (eg Stainless Steel / Aluminium), Turnbuckles, D-shackles, Irrigation pipes and fittings, Drilling rigs (onshore & offshore).
2. STEEL WIRE ROPE:
Provides superior protection from caustic embrittlement caused by hybridisation of mineral / clay base (conventional greases). Stabily ph neutral (6.8) LANOLENE™ TEFLAN Grease insulates against electrolysis / acidic attack. Delivers high interstrand loading and lubrication. Thermal cycling ensures core penetration and active hermetic seal of strands, braiding and core base substrates. Ideally suited to supplement 1:4 Standard Cable Grease for use on High Speed / High Cycle cables (i.e. Elevators, Cranes, Marine Winches). Optimal results are always achieved applied totally moisture free and preferably warm >60°<100°C and dry throughout. Excellent results achieved with direct application to Low Speed / Low - Medium Cycle Cables in wet / Salt Water environments. LANOLENE™ TEFLAN Grease Delivers Service Life Extension and maintains suppleness.
Rudder post, Stern Gland, Yacht Winch and Windlass lubricant (use sparingly), Trunnions and Pivots, Pump and Valve glands, Bushes (blended with extreme high pressure grease, prevents moisture penetration), Outboard & Stern drive tilt and steering pivots.
4. PUMP SERVICE:
Apply LANOLENE™ TEFLAN Grease to Pump and valve Packings as "break in" lube and stuffing box corrosion inhibitor. Service life extender for pump bearings - see (5)
5. BEARINGS & BUSHES - HIGH TEMPERATURE, SPEED and LOAD:
LANOLENE™ TEFLAN Grease extends service life by introducing Anhydrous ability and increasing load pressures. Bearings & Bushes operating <10° >40°C to >max. 200°C, Blend LANOLENE™ TEFLAN Grease 1:4 Parts supplement Bearing Grease (suitable for operating extremes) to extend bearing service life and reduce moisture penetration (hydrolysis), thereby reducing acidic / electrolysis attack of bearing and housing by grease. Ideally suited to Bearings operating in moist - wet environments i.e. Pumps, Boat trailers, Aquaculture aerators etc.
Fully compatible with petroleum oils and greases for Service Life Extension.
LANOLENE is a registered trademark.(TEFLON is a registered Trademark of Du Pont Corporation.)
LANOLENE TEFLAN is non-toxic and non-flammable.