Telephone and Telecommunication Antennae

LANOLENE™ Industrial Coatings provide exceptional protection from the effects of Galvanic Crystallisation on Antenna Arrays. Due to Construction of dissimilar metals and high thermal cycling rates. Base metal penetration and remaining Active LANOLENE™ Industrial abilities shine, especially in severe corrosive environments (i.e. Seaside, Acid rain areas).

Technical Application Guide Ref: LICTG03A
Msds: Solution - LICMD01A
Msds: Grease - LIGMD01A

BENEFITS
ENVIRONMENTALLY FRIENDLY
ORGANIC PASSIVATE
CORROSION INHIBITOR
PENETRANT
CRYSTALLISATION RESISTANT
ANTI-SEIZE
PH (6.8) NEUTRAL
NON-TOXIC
NON-CARCINOGENIC
NON-EVAPORATING
NON-LEACHING
THERMALLY ACTIVE
32 kV/rms DIELECTRIC STRENGTH
REDUCES RESIDUAL DIODE ACTION OF ANTENNA FITTINGS.

APPLICATION:

1. Wire Brush all existing fittings to remove flaking and powder oxides.

2. Apply LANOLENE™ Industrial Solution or Grease liberally to complete installation.

3. All components must be dry prior to application and preferably, this done on a warm to hot day. Enabling LANOLENE™ Industrial Coatings to penetrate the metals substrate (surface skin).

4. Apply LANOLENE™ Industrial Coatings to stabilisation cables and fittings to preserve and prevent caustic embrittlement of cable, which with moisture and earthing contribute to diode action and signal retransmission.

5. Use LANOLENE™ Grease as an Anti- Seize for all fasteners during manufacture and installation for the extra life and serviceability guarantee.

Naturally Clear Transmission - LANOLENE™ Industrial Coatings.

LANOLENE™ is a registered trademark, manufactured and marketed by EXCEL EQUIP Pty. Ltd.